iXR
The iXR is a compact USB audio and MIDI interface with two mic preamps, balanced outputs, a headphone output and MIDI in/out. It records up to 24-bit/96kHz and connects to iOS devices, Macs and Windows PCs, for musicians and home recordists. It has been discontinued.
- 2 Ultra-HDDA mic preamps with +48V phantom power
- Up to 24-bit/96kHz recording over USB 2.0
- MFi certified for direct iOS connection
- 5-pin DIN MIDI input and output
- Zero-latency direct monitoring, mono/stereo switchable
- Discontinued model
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin iXR, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The iXR combines two microphone preamps, a direct guitar input, two balanced line outputs and a headphone output in a solid aluminium case. Recording is supported at 16 or 24 bit and sample rates from 44.1 kHz to 96 kHz. The mic/line inputs take XLR or balanced TRS plugs and can supply +48V phantom power, with a 57 dB gain range. Zero-latency direct monitoring can be switched between mono and stereo, the line output can carry either the monitor mix or the computer signal, and unused channels can be muted to remove noise.
It connects to computers over USB 2.0 and is USB audio 2.0 compliant. It is bus powered from a computer. For iOS devices it is MFi certified and connects directly, powered from a USB adapter, a mobile battery or an external AA battery pack. Windows uses ASIO 2.0 and WDM drivers, and Mac uses Core Audio and Core MIDI. Operation has been confirmed with several major DAW applications, including Pro Tools, Cubase, Live, Studio One, GarageBand and Logic Pro.
A 5-pin DIN MIDI input and output let it work with keyboards and other MIDI devices. Knob guards protect the controls in transit, and separate level controls serve the line and headphone outputs. A Cubase LE 8 licence card and a licence for removing the restrictions of the Cubasis LE demo are included. A bundled TRACKPACK variant adds a microphone and accessories.
Tekniset tiedot
- Merkki
- Tascam
- Malli
- iXR
- Luokka
- Studio › Äänikortit
Inputs
- Mic preamps
- 2 Ultra-HDDA
- Mic input connector
- XLR-3-31 (balanced)
- Mic input impedance
- 2.2kΩ
- Mic maximum input level
- +8dBu (1.9467Vrms)
- Instrument input connector
- 6.3mm (1/4") TS (unbalanced)
- Instrument input impedance
- 1MΩ or more
- Line input connector
- 6.3mm (1/4") TRS (balanced)
- Line input impedance
- 10kΩ
- Line maximum input level
- +20dBu (7.75Vrms)
- Gain range
- 57dB
- Phantom power
- +48V
Outputs
- Line outputs
- 2 × 6.3mm (1/4") TRS (balanced)
- Line output impedance
- 110Ω
- Standard output level
- -4dBu (1.273Vrms)
- Headphone output
- 3.5mm (1/8") stereo mini jack
- Headphone maximum output
- 18mW + 18mW or more (32Ω load, THD+N less than 0.1%)
Connectivity
- MIDI
- 5-pin DIN in/out, standard MIDI format
- Computer USB port
- USB B type 4-pin, USB 2.0 High Speed (480Mbps)
- iOS power port
- USB A type, USB 2.0 High Speed (480Mbps)
- Windows drivers
- ASIO 2.0, WDM, MIDI
- Mac drivers
- Core Audio, Core MIDI
- iOS driver
- Core Audio for iPhone
Audio
- Sampling frequency
- 44.1k/48k/88.2k/96k Hz
- Quantization bit rate
- 16/24bit
- Distortion
- 0.0025% or less (JEITA)
- S/N ratio
- 101dB or more (JEITA)
- Crosstalk
- 95dB or more (1kHz, JEITA)
- Mic amp EIN
- -125dBu or more (150Ω termination, gain at MAX)
Power
- Computer connection
- USB bus powered
- iOS connection
- USB adapter or mobile battery (5 V, 700mA minimum), or TASCAM BP-6AA
- Power consumption
- 2.5W
Physical
- Dimensions
- 210(W)×35.3(H)×410.7(D)mm
- Weight
- 660g
- Operating temperature
- 5 to 35˚C
In the box
- Accessories
- USB cable, Steinberg Cubase LE installation guide, Owner's manual (including warranty card)