Deco V2
Deco V2 is a compact stereo pedal that combines tape saturation with a two-deck doubletracker for slapback, chorus, flanging and echo effects. It is aimed at guitarists, and at studio users via a Studio Mode with extra headroom, and adds MIDI control and presets.
- Tape saturation plus two-deck doubletracker in one pedal
- Classic reel-to-reel and cassette (ALC) voicings
- Lag Time from -.3 ms flange up to 500 ms tape echo
- Full MIDI over EXP/MIDI jack or USB-C, 300 presets
- Relay true bypass or buffered bypass
- Mono or stereo input, stereo outputs, Studio Mode +10dB
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Deco V2, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
Deco V2 pairs a tape saturation section with a doubletracker. The saturation side covers light tape compression through to gentle tape-style overdrive, with Saturation, Tone and Volume controls and a Voice switch that selects a classic reel-to-reel response or a compressed cassette character. The doubletracker mixes a reference deck with a lag deck. Lag Time spans flanging, chorus, slapback and tape echo ranges, while Blend, Wobble and a Blend Type switch (sum, invert, bounce) shape the result.
Additional functions include a Wide Stereo mode, a hold-to-engage Auto-Flange through-zero effect on the Doubletracker footswitch, a selectable relay-based true bypass or buffered bypass, and a Studio Mode that adds 10dB of headroom for bass, synths and keyboards. The input uses a discrete Class A JFET stage, and processing runs on an ARM chip.
A TRS input with a rear mono/stereo switch feeds two TS outputs. The EXP/MIDI jack and USB-C port accept MIDI, with Lag Time sync to MIDI Clock and 300 preset locations. The pedal runs from a 9V DC supply, which is sold separately.
Video
Tekniset tiedot
- Merkki
- Strymon
- Malli
- Deco V2
- Luokka
- Efektit ja pedaalit
Inputs
- Audio input
- High impedance ultra low-noise discrete Class A JFET TRS stereo input
- Input switch
- Mono (TS) or Stereo (TRS)
- Audio input impedance
- 1M Ohm
- Expression / MIDI input
- EXP/MIDI jack for TRS expression pedal, MiniSwitch, MultiSwitch Plus or TRS MIDI
Outputs
- Audio outputs
- Low impedance independent TS stereo outputs (Out L, Out R)
- Audio output impedance
- 100 Ohm
Connectivity
- USB
- USB-C for MIDI from a computer and firmware updates
- MIDI preset locations
- 300
- MIDI Clock Sync
- Lag Deck delay time, saved per preset
Audio
- Converters
- 24-bit 96kHz A/D and D/A
- Processor
- 520MHz ARM Superscalar
- Processing
- 32-bit floating point
- Frequency response
- 20Hz to 20kHz
- Bypass
- Electromechanical relay true bypass (default) or buffered bypass
- Voice
- Classic or cassette
- Blend Type
- Sum, invert or bounce
- Studio Mode headroom
- 10dB added
Controls
- Footswitches
- Tape Saturation On/Off and Doubletracker On/Off
Power
- Power requirement
- 9V DC, center negative, 300mA minimum (power supply not included)
Physical
- Dimensions (D x W x H)
- 4.5" (11.43 cm) x 4" (10.16 cm) x 2.4" (6.1 cm)
- Chassis
- Anodized silver aluminum
- Origin
- Designed and built in the USA