1962 Bluesbreaker Combo
The 1962 Bluesbreaker Combo is a 30W all-valve 2x12" combo from Marshall's Vintage Reissue range, built in the UK. It has two voices, a three-band EQ and valve tremolo, and suits players who want a simple plug-and-play blues and crunch amp.
- 30W all-valve combo from the Vintage Reissue range
- Two 12" Celestion G12M-25 speakers
- Valve tremolo, footswitch-controllable
- Two bridgeable channels with three-band EQ
- Four instrument inputs, high/low sensitivity
- Designed, engineered and made in the UK
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin 1962 Bluesbreaker Combo, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The 1962 Bluesbreaker Combo is a two-channel, all-valve combo amplifier rated at 30W. It is part of the Vintage Reissue range and is designed and built in the UK. Power comes from two 5881 power valves, with a GZ34 rectifier and ECC83 preamp and phase-splitter valves. The channels can be bridged.
Controls are kept basic: Volume I and II, a three-band EQ (Bass, Middle, Treble), Presence, and a valve tremolo with Speed and Intensity knobs. The tremolo can be switched with a footswitch. There is no effects loop. Two 12" Celestion G12M-25 speakers (16Ω, 25W each) provide a mid-forward voice with a tight high end.
Four 1/4" instrument inputs (high and low sensitivity) serve the two channels. Two 1/4" speaker outputs allow a selectable 16Ω, 8Ω or 4Ω load for adding an extension cabinet. The finish is black, and a detachable power cable is supplied.
Video
Tekniset tiedot
- Merkki
- Marshall
- Malli
- 1962 Bluesbreaker Combo
- Luokka
- Kitarat ja bassot
General
- Model
- 1962 Bluesbreaker Combo
- Range
- Vintage reissue
- Technology
- Valve
- Channels
- 2, bridgeable
- Colour
- Black
Audio
- Output wattage
- 30W
- Effects
- Valve tremolo
- Effects loop
- No
- Controls
- Volume II, Volume I, Treble, Middle, Bass, Presence, Tremolo Intensity, Tremolo Speed
Inputs
- Instrument inputs
- 4 x 1/4" jack (high/low sensitivity)
Outputs
- Speaker outputs
- 2 x 1/4" jack, selectable 16Ω / 8Ω / 4Ω load
Speakers
- Speaker configuration
- 2x12"
- Speaker model
- Celestion G12M-25 (16Ω, 25w)
- Unit impedance
- 8Ω
Valves
- Preamp valves
- 3 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x 5881
- Rectifier valves
- 1 x GZ34
Physical
- Weight
- 30.2 kg / 67 lb
- Width
- 740 mm / 29.1"
- Height
- 610 mm / 24"
- Depth
- 265 mm / 10.4"
- Country of origin
- Designed and engineered in UK. Made in UK.
In the box
- Box contents
- PEDL-90003 included, detachable power cable included