Thunder
The Thunder is a handheld large-diaphragm condenser microphone with a cardioid pattern and a 28mm hand-built capsule. It suits vocals and acoustic instruments, on stage or in the studio, and needs 48 V phantom power.
- 28mm hand-built large-diaphragm capsule
- Cardioid pattern, pressure-gradient transducer
- Frequency range 20 Hz to 20 kHz
- Max SPL 136 dB at 0.5% THD
- 3-pin XLR output, +48 V phantom power
- Shockmount and mic clip included
Kuvat
6Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Thunder, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
Thunder is a handheld condenser microphone built around a hand-assembled 28mm large-diaphragm capsule. It uses a pressure-gradient transducer with a shock-mounted capsule. The tuning is described as having extended upper clarity and a smooth mid-range, so it can serve as a main or supporting microphone for voice or instruments in recording and live settings.
The cardioid pickup pattern favours the source in front of the microphone, which helps separate it from other sounds and reduces feedback. Frequency response runs from 20 Hz to 20 kHz, sensitivity is -35 dBV at 1 kHz, and the maximum SPL is 136 dB at 0.5% THD. Equivalent noise is rated at 6 dB-A.
The microphone connects through a 3-pin XLR male output and is powered by external +48 V phantom power, drawing 3 mA or less. A shockmount and a mic clip come in the box, together with a quickstart guide.
Video
Tekniset tiedot
- Merkki
- iCON
- Malli
- Thunder
- Luokka
- Studio › Mikrofonit
Transducer
- Transducer type
- electrostatic
- Operating principle
- pressure gradient
- Diaphragm active diameter
- 28mm
- Polar pattern
- unidirectional, cardioid
Audio
- Frequency range
- 20 Hz to 20 kHz
- Sensitivity at 1 kHz into 1000 Ω load
- -35dBV
- Maximum SPL for 0.5% THD at 1000 Ω load
- 136 dB
- S/N ratio DIN/IEC 651 A-weighted
- 89dB
- Equivalent noise level DIN/IEC A-weighted
- 6 dB-A
- Dynamic range of the microphone preamplifier
- 130 dB
Outputs
- Output connector
- 3-pin XLR male
- Output impedance
- 50 Ω
- Rated load impedance
- 1000 Ω
- Suggested load impedance
- >1000Ω
Power
- Phantom powering voltage on pin 2 & 3 of XLR
- +48V (+/-4V)
- Current consumption
- ≤3 mA
Physical
- Dimensions
- 52mm x 52mm x 190mm
- Weight
- 0.283kg
In the box
- Microphone
- Thunder microphone
- Shockmount
- Included
- Mic clip
- Included
- Documentation
- Quickstart Guide