Shield 2
The Shield is a large-diaphragm electrostatic condenser microphone from iCON's Space Series, with a cardioid pattern and 48 V phantom power. It targets vocals, acoustic instruments, amplifiers and broadcast or podcast work.
- Large-diaphragm electrostatic condenser, cardioid pattern
- Shock-mounted capsule, pressure-gradient design
- Max SPL 138 dB for 0.5% THD at 1000 Ω load
- Sensitivity 33 mV/Pa, equivalent noise 8 dB-A
- 3-pin XLR output, +48 V phantom power
- Includes shock mount, magnetic pop filter and aluminum case
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Shield 2, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The Shield is a pressure-gradient condenser microphone built around a hand-built large-diaphragm capsule, with a 34 mm active diaphragm diameter. Its cardioid pattern favours the source in front of the capsule and helps with separation and feedback rejection. The capsule is shock-mounted to reduce handling noise and vibration. The tonal character is described as neutral and transparent, with extended upper clarity and a smooth mid-range.
The body is die-cast metal. The circuit uses Wima polystyrene and film capacitors and Fairchild NOS transistors. Rated sensitivity is 33 mV/Pa into 1000 Ω, maximum SPL for 0.5% THD is 138 dB, and equivalent noise level is 8 dB-A. It is suited to vocals, acoustic instruments, guitar amplifiers and broadcasting or podcasting, either as a main or support microphone.
The microphone connects through a 3-pin male XLR output and needs external +48 V phantom power with a current draw of 5 mA or less. A suspension shock mount and a magnetic slip-on pop filter are supplied, together with an aluminum carry case.
Video
Tekniset tiedot
- Merkki
- iCON
- Malli
- Shield 2
- Luokka
- Studio › Mikrofonit
Audio
- Transducer type
- electrostatic
- Operating principle
- pressure gradient
- Diaphragm active diameter
- 34mm
- Polar pattern
- unidirectional, cardioid
- Frequency range
- 20Hz to 20kHz
- Sensitivity at 1 kHz into 1000 Ω load
- 33mV/Pa
- Maximum SPL for 0.5% THD at 1000 Ω load
- 138dB
- S/N ratio (DIN/IEC 651 A-weighted)
- 80dB
- Equivalent noise level (DIN/IEC A-weighted)
- 8dB-A
- Dynamic range of the microphone preamplifier
- 130dB
Outputs
- Output connector
- 3-pin XLR male
- Output impedance
- 50 Ω
- Rated load impedance
- 1000 Ω
- Suggested load impedance
- >250Ω
Power
- Phantom powering voltage on pin 2 & 3 of XLR
- +48V (+/-4V)
- Current consumption
- ≤5 mA
Physical
- Dimensions
- 60mm x 25mm x 140mm
- Weight
- 0.273kg
- Body
- Metal die-cast
In the box
- Included
- Shield microphone, shock mount, magnetic slip-on pop filter, quickstart guide
- Carry case
- Aluminum storage case