Octave Multiplexer
Analog sub-octave pedal that adds a bass tone one octave below the note played, with a blend control and two filters for shaping the sub signal. It is monophonic, so it suits bass and single-note guitar lines and can also be used on vocals.
- Analog sub-octave one octave below the played note
- Separate High Filter and Bass Filter controls
- Sub switch and Blend (wet/dry) knob
- Monophonic: works on single notes only
- True bypass with Dry Out and Effect Out jacks
- 9V battery included; die-cast chassis
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Octave Multiplexer, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The Octave Multiplexer is an analog sub-octave generator in a die-cast chassis. It produces a tone one octave under the played note and mixes it with the dry signal using a wet/dry Blend knob. It tracks single notes only, so chords will not work as intended.
The sub-octave can be shaped with two separate filters. The Bass Filter adjusts the fundamental and lower harmonics of the sub-octave, and a Sub switch brings that filter in or out. The High Filter adjusts the higher harmonics. A footswitch with a status LED engages the effect, and the pedal uses true bypass.
The instrument plugs into the input jack. The Effect Out jack goes to the amplifier, and a separate Dry Out jack is wired directly to the input for running a parallel path. Power comes from a 9V battery, which is included, or from an optional 9.6VDC 200mA adapter sold separately. The pedal was released in 2007 and discontinued in 2021.
Video
Tekniset tiedot
- Merkki
- Electro-Harmonix
- Malli
- Octave Multiplexer
- Luokka
- Efektit ja pedaalit
Audio
- Circuit
- Analog
- Audio
- Mono
- Bypass
- True Bypass
- Effect type
- Analog sub-octave generator
Controls
- High Filter knob
- Shapes the higher harmonics of the sub-octave
- Bass Filter knob
- Shapes the fundamental and lower harmonics of the sub-octave
- Blend knob
- Wet/dry
- Sub switch
- Switches the Bass Filter in and out
- Footswitch
- Engages/disengages the effect, with status LED
Inputs
- Input jack
- 1, for instrument
Outputs
- Effect Out jack
- Connects to amplifier
- Dry Out jack
- Connected directly to the Input jack
Power
- Power supply
- 9V battery included
- Optional adapter
- 9.6VDC-200mA (not included)
- Current draw
- 12mA
Physical
- Dimensions (in)
- 4.75 x 4 x 2.25
- Chassis
- Die-cast
In the box
- Battery
- 9V battery