
Sunn O))) Life Pedal V2
Compact pedalboard version of a limited-run distortion pedal that combines an analog octave-up, an LM308-based distortion and a separate clean MOSFET booster. Aimed at guitarists driving tube amplifiers into heavy saturation. Listed as no longer in production.
- Analog octave-up into LM308 distortion, plus a separate clean booster
- Three-way clipping switch: OpAmp, Asymmetric, Symmetric
- Expression pedal input controls octave blend
- Relay true bypass with Flexi-Switch latching/momentary
- 9 V DC, 2.1 mm negative center, 15 mA
- Limited to 2,500 units; no longer in production
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Sunn O))) Life Pedal V2, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
Life Pedal V2 is a two-stage guitar effect: an octave distortion and a booster, each with its own footswitch. The signal path runs Octave, then Distortion, then Boost. The distortion side is based on a classic LM308 rodent-style circuit with tantalum capacitors, and the octave is an all-discrete analog full-wave rectifier using a pair of germanium diodes. The octave is monophonic and works best on single notes played high on the neck with the neck pickup.
A three-position clipping switch selects no diodes (op amp), asymmetrical clipping (two silicon diodes and one LED) or the standard symmetrical silicon-diode setup. The Filter control is a low-pass filter, and the Distortion knob provides about +60 dB of gain. The booster is a clean, high-impedance MOSFET stage with its own Magnitude volume control, meant to push an amplifier's preamp into saturation.
The octave blend can be controlled with an expression pedal through a dedicated input. Both footswitches use relay-based true bypass with Flexi-Switch, allowing latching or momentary operation, so the unit needs power to pass signal. It runs on a 9 V DC supply with a 2.1 mm negative-center barrel and draws 15 mA. The V2 was limited to 2,500 units worldwide.
Video
Tekniset tiedot
- Merkki
- EarthQuaker Devices
- Malli
- Sunn O))) Life Pedal V2
- Luokka
- Efektit ja pedaalit
Controls
- Amplitude
- Output volume for the octave distortion
- Filter
- Low pass filter, approx. 500 Hz to 30 kHz
- Distortion
- Approx. +60 dB of gain
- Magnitude
- Booster output volume (unity around noon)
- Octave
- Blends in the analog octave
- Clipping switch
- OpAmp / Asymm / Symm
- Footswitches
- Left: Boost; Right: Octave Distortion
Inputs
- Octave Distortion input impedance
- 1 MΩ
- Booster input impedance
- 500 kΩ
- Octave EXP input
- Expression pedal input for octave blend
Outputs
- Octave Distortion output impedance
- <1 kΩ
- Booster output impedance
- <1 kΩ
Audio
- Signal path
- Octave > Distortion > Boost
- Distortion circuit
- LM308 op amp based, tantalum caps
- Octave circuit
- All-discrete analog full-wave rectifier, germanium diodes
- Booster circuit
- All-discrete MOSFET
- Bypass
- Relay-based true bypass, Flexi-Switch Technology
Power
- Power supply
- 9 V DC, 2.1 mm negative center barrel
- Current draw
- 15 mA
Physical
- Dimensions
- 4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs
- Production run
- Limited to 2,500 units worldwide
- Made in
- Akron, Ohio