Statement Phono
Dual-chassis phono preamplifier with a separate battery-powered supply, switchable MM/MC input and adjustable equalisation curves. Aimed at experienced analogue enthusiasts who want to tune their phono stage in detail.
- Switchable MM/MC with +34 dB / +54 dB gain
- MC input impedance adjustable from 25 Ω to 10 kΩ
- Separate fully balanced battery power supply
- Two phono and two line inputs plus front 3.5 mm AUX
- RCA, XLR and 6.3 mm headphone outputs
- 5-year warranty with card returned within 14 days
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Statement Phono, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The Statement Phono is a phono preamplifier built in two chassis: a preamp unit and an external power supply. It provides switchable MM and MC operation with gain of +34 dB for MM and +54 dB for MC at 1 kHz. MC input impedance ranges from 25 Ω to 10 kΩ, MM input impedance is 47 kΩ. A subsonic filter can be switched in, and the RIAA curve is held to ±0.05 dB from 20 to 100 kHz.
The circuit uses silver-mica capacitors, low-noise resistors and selected capacitors. Equalisation can be adjusted freely, with two passive filters covering 75 μs, 318 μs and 3180 μs time constants. Power comes from a fully balanced battery supply, which keeps mains interference away from the signal path.
There are two phono inputs (one balanced XLR, one unbalanced RCA) and two line inputs (one XLR, one RCA), plus a 3.5 mm AUX jack on the front. Outputs are RCA, XLR and a 6.3 mm headphone jack. Volume control is built in, so the unit can serve as a control hub for several sources. Both chassis are made of aluminium.
Video
Tekniset tiedot
- Merkki
- Clearaudio
- Malli
- Statement Phono
- Luokka
- Hi-Fi ja kodin audio › Vahvistimet
Audio
- Modes
- MM / MC switchable
- Subsonic filter
- Switchable
- Gain at 1 kHz
- +34 dB (MM) / +54 dB (MC)
- RIAA accuracy
- ± 0.05 dB / 20 – 100 kHz
- Distortion (THD)
- 5 mV / 1 kHz / +50 dB: < 0.0035 %; 0.5 mV / 1 kHz / +70 dB: < 0.0015 %
- Signal-to-noise ratio
- 5 mV / 1 kHz / +50 dB: -82 dB / -90 dB (A); 0.5 mV / 1 kHz / +70 dB: -72 dB / -80 dB (A)
- Overload margin
- + 25 dB
- Channel separation
- > 80 dB (@ 1 kHz)
- Equalisation
- 75 μs / 318 μs / 3180 μs, 2 passive filters
Inputs
- Input impedance
- 47 kΩ (MM) / 25 Ω – 10 kΩ (MC)
- Phono 1
- Balanced XLR (rear)
- Phono 2
- Unbalanced RCA (rear)
- Line 1
- Balanced XLR (rear)
- Line 2
- Unbalanced RCA (rear)
- AUX
- 3.5 mm jack (front)
Outputs
- Line outputs
- Unbalanced (RCA), balanced (XLR)
- Headphone output
- 6.3 mm jack
- Maximum output voltage
- > 12 V
- Output impedance
- 10 Ω
Power
- Power supply
- Fully balanced battery power supply
- Mains voltage / channel
- 2 × 2 × 22 V / 1 A
- Battery capacity / channel
- 2 × 18 V / 3.2 Ah
- Maximum power consumption
- 200 W
- Power consumption in operation
- 50 – 100 W
- Standby power consumption
- < 0.5 W
Physical
- Preamp dimensions (W/D/H)
- approx. 435 × 350 × 100 mm
- Power supply dimensions (W/D/H)
- approx. 435 × 350 × 100 mm
- Preamp weight
- approx. 12 kg
- Power supply weight
- approx. 22 kg
- Material
- Aluminium
- Manufacturer warranty
- 5 years (warranty card returned within 14 days of purchase)