US-144MKII
Bus-powered USB 2.0 audio interface with two XLR mic preamps, balanced line inputs, a guitar input, S/PDIF and MIDI I/O. Aimed at home and portable recording with a Mac or Windows computer. Discontinued; replaced by the US-2x2HR.
- 2 XLR mic preamps with phantom power
- Balanced line inputs plus a guitar input
- S/PDIF digital in and out
- Up to 96 kHz / 24-bit
- USB 2.0 bus-powered, no power adapter
- MIDI In and Out on 5-pin DIN
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin US-144MKII, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The US-144MKII is a four-input, four-output USB audio interface that records at up to 96 kHz and 24 bit. Two XLR microphone preamps with phantom power sit alongside a pair of balanced line inputs and a guitar-level input for connecting an electric guitar or bass directly. A pair of S/PDIF digital inputs and outputs completes the four-in, four-out layout.
Zero-latency monitoring lets the performer hear the input without the round trip through the computer. Line outputs feed monitors, while a front-panel 1/4" stereo jack serves headphones, and the line and headphone levels have separate controls, so monitors need not be muted when switching to headphones. MIDI In and Out DIN jacks allow synths and drum machines to be connected. The housing uses metal components for portable use.
The unit connects to Mac and Windows computers over USB 2.0 and draws its power from the USB bus. Cubase LE from Steinberg is bundled, and drivers cover WDM, ASIO and GSIF2 on Windows and Core Audio on Mac. The maker lists the model as discontinued and replaced by the US-2x2HR.
Video
Tekniset tiedot
- Merkki
- Tascam
- Malli
- US-144MKII
- Luokka
- Studio › Äänikortit
Audio
- Supported sampling frequency
- 44.1/48/88.2/96kHz
- Supported bit rate
- 16/24bit
- Frequency response (44.1/48kHz, MIC IN to LINE OUT)
- 20Hz to 20kHz, +0.5/-1.0dB
- Frequency response (88.2/96kHz, MIC IN to LINE OUT)
- 20Hz to 40kHz, +0.5/-1.5dB
- S/N ratio (ADC to DAC)
- 98dB (INPUT knob set to LINE, 20kHz LPF + A-weighted)
- S/N ratio (Monitor)
- 107dB (INPUT knob set to LINE, 20kHz LPF + A-weighted)
- THD (ADC to DAC)
- 0.0045% or less (INPUT knob set to LINE, 1kHz +20dBu input, 20kHz LPF)
- THD (Monitor)
- 0.002% or less (INPUT knob set to LINE, 1kHz +20dBu input, 20kHz LPF)
Inputs
- Mic input connector
- XLR-3-31 (1:GND, 2:HOT, 3:COLD), balanced
- Mic input impedance
- 2.2k ohms
- Mic nominal input level (INPUT:MAX)
- -58dBu
- Mic nominal input level (INPUT:MIN)
- -14dBu
- Mic maximum input level (INPUT:MIN)
- +2dBu
- Line input connector
- 6.3mm (1/4") TRS jack (T:HOT, R:COLD, S:GND), balanced
- Input impedance (MIC/LINE)
- 15k ohms
- Input impedance (GUITAR)
- 1M ohms
- Nominal input level (MIC/LINE)
- -40dBu to +4dBu
- Nominal input level (GUITAR)
- -51dBV to -7dBV
- Maximum input level (MIC/LINE)
- +20dBu
- Maximum input level (GUITAR)
- +9dBV
Outputs
- Line output connector
- RCA pin-jack
- Line output impedance
- 200ohms
- Line nominal output level
- -10dBV
- Line maximum output level
- +6dBV
- Headphone connector
- 6.3mm (1/4") stereo phone jack
- Headphone maximum output level
- 18mW+18mW (32ohms loaded)
Connectivity
- Digital audio connector
- RCA pin-jack (coaxial)
- Digital audio format
- IEC60958-3 (S/P DIF)
- MIDI In
- DIN 5-pin
- MIDI Out
- DIN 5-pin
- USB connector
- USB B type 4-pin
- USB format
- USB 2.0 HIGH SPEED/USB 1.1 FULL SPEED
Power
- Power
- USB bus powered (5V, Max 500mA)
- Power consumption
- 2.5W
Physical
- Dimensions
- 135.4(W)×47(H)×179(D)mm
- Weight
- 0.7kg
Software
- Bundle software
- Cubase LE
- Windows driver
- WDM, ASIO, GSIF2
- Mac driver
- Core Audio
In the box
- Accessories
- CD-ROM (driver and manuals), USB cable, DVD-ROM (Cubase LE), Cubase LE insert sheet, Warranty card, Owner's manual