UMD192
The UMD192 is a half-rack USB 3.0 audio interface that also bridges MADI and Dante, carrying up to 192 channels at 48/96 kHz or 128 channels at 192 kHz. It suits live sound, broadcast and high-channel-count studio work, including as a computer interface for Dante or MADI systems.
- 192 channels at 48/96 kHz, 128 channels at 192 kHz
- USB 3.0 Type-C computer interface
- 6x MADI BNC with 3x dual-redundant mode
- Dante with AES67 and ST 2110 (DDM), down to 0.25 ms
- Powered by AC, PoE or USB, with failover
- Class-compliant on macOS; ASIO/WDM driver for Windows
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin UMD192, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The UMD192 connects a computer over USB 3.0 to MADI and Dante networks. It can pass audio in both directions between any two of the three formats, while the third format can receive a split feed. This makes it usable as a recording and playback interface, or as a bridge that brings MADI devices onto a Dante network.
On the MADI side there are six BNC connectors, which can be set to a redundant mode giving three dual-redundant connections. The Dante side supports AES67 and ST 2110 (with DDM) and latency as low as 0.25 ms. The unit can be clocked from the Dante network or from MADI port 1, and it covers sample rates from 44.1 to 192 kHz.
Front-panel buttons select the signal-flow mode, clock source and MADI redundancy, with a lockout that prevents accidental changes. Power can come from AC mains, Power over Ethernet or USB bus power, alone or combined for failover. The unit can sit on a desktop, beside a console or in a rack. It is class-compliant on macOS and uses an included ASIO/WDM driver on Windows.
Video
Tekniset tiedot
- Merkki
- SSL
- Malli
- UMD192
- Luokka
- Studio › Äänikortit
Audio
- Channels at 44.1/48 kHz
- 192
- Channels at 88.2/96 kHz
- 192
- Channels at 176.4/192 kHz
- 128
- Sample rates
- 44.1 to 192 kHz
- Dante latency
- As low as 0.25 ms
Connectivity
- USB
- USB 3.0 Type C
- MADI
- 6x BNC pairs
- MADI redundancy
- 3x dual-redundant connections
- Dante
- Dante AoIP with AES67 and ST 2110 (with DDM) support
- Ethernet ports
- 2x Primary, 2x Secondary, ruggedised, with Link & Activity LEDs
Clocking
- Clock sources
- Dante/AoIP network or MADI stream on port 1
- Redundant MADI clock
- From the active input of the redundant pair
Power
- Power options
- AC mains, Power over Ethernet (PoE), USB
- Redundancy
- Power sources can be combined for failover
Software
- macOS
- macOS 12 and above, class-compliant, plug and play
- Windows
- Windows 11, included ASIO/WDM driver
Physical
- Form factor
- ½RU, portable
- Mounting
- Desktop, console-side or rack-mounted
- Front panel
- Indicators with lockout, mode, clock source and MADI redundancy controls
In the box
- USB cables
- USB-C to C, USB-A to C adapter
- Power cable
- IEC power cable