TL48
A subminiature lavalier microphone with a dual-diaphragm capsule and a mid-band boost around 7 kHz that favours speech. It is aimed at film, TV and theatre sound teams who need a concealable, sweat-resistant mic for dialogue.
- Dual-diaphragm capsule for consistent off-axis response
- 6 dB mid-band boost at about 7 kHz for dialogue
- Hydrophobic lining in fixed frequency cap resists sweat
- Paintable 1.6 mm kink-resistant cable
- Redundant ground in cable acts as secondary shield
- LEMO, MTQG, MicroDot, XLR/preamp or bare-wire termination
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin TL48, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The TL48 is a small clip-on microphone built around a dual-diaphragm capsule. The design is meant to keep the sound consistent when the speaker turns or moves, and it is tuned for dialogue with a 6 dB lift in the mid band at about 7 kHz. Sensitivity is rated low, and the maker lists low self-noise and wide dynamic range.
The capsule has a fixed frequency cap that can be painted, with a hydrophobic woven lining inside to keep out sweat and moisture. The 1.6 mm paintable cable is described as free of memory effect and kinks, and it carries a second redundant ground that acts as an extra shield. The mic is small enough to hide in costume or to sit against the skin under wardrobe, and a range of mounts and clips is available.
The mic is offered with several termination options: LEMO, MTQG/TA4F, MicroDot, XLR with preamp, and open cable ends. It comes in white, tan and black. Replacement connector kits, clips, windscreens, mounts, preamp mounting hardware and a storage case are sold as optional accessories.
Video
Tekniset tiedot
- Merkki
- Shure
- Malli
- TL48
- Luokka
- Studio › Mikrofonit
Audio
- Transducer design
- Dual-diaphragm
- Sound signature
- Tailored for dialogue
- Mid-band boost
- 6 dB at about 7 kHz
- Sensitivity
- Low
- Self-noise
- Best-in-class low self-noise
- Dynamic range
- Best-in-class dynamic range
Connectivity
- Connector options
- LEMO, MTQG/TA4F, MicroDot, XLR/Preamp, NC (bare wire)
- Listed connector variants
- 1-Pin LEMO, 6-Pin LEMO, Open Cable Ends, LEMO3, MDOT, MTQG, 3-Pin XLR
- Replacement LEMO3 connector
- WA416, 1.6 mm (also for TL46, TL47, TH53)
Physical
- Type
- Subminiature lavalier microphone
- Cable diameter
- 1.6 mm
- Cable features
- Paintable, no memory effect, kink-resistant, dual redundant ground
- Frequency cap
- Fixed, paintable, internal hydrophobic woven lining
- Colors
- White, Tan, Black
Accessories
- Clips
- Single tie clip, dual tie clip, vampire clip
- Mounts
- Clear sticky mount, vampire sticky mount, standoff
- Other accessories
- Windscreens, preamp mounting kit, preamp beltclip, storage case
In the box
- Model SKU (listed)
- TL48-LEMO1-A