MSP 318-4
Fiber-optic HDMI extender set with a transmitter and a receiver that connect over LC fiber. It suits portable setups and tight spaces where an HDMI signal has to travel farther than a normal cable allows.
- Fiber HDMI extender set: transmitter plus receiver
- Single-mode fiber up to 2000m (HDCP not compatible)
- Single-mode up to 200m with HDCP; multi-mode up to 300m
- Integral LC fiber ports
- EDID management via micro USB
- Power supplies included for both ends
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin MSP 318-4, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The MSP 318-4 is a compact HDMI extender set. The transmitter plugs straight into an HDMI source. The receiver plugs into an HDMI port on a display or downstream device. The two units are linked by fiber optic cable through integral LC ports. Both single-mode and multi-mode fiber can be used.
Over multi-mode fiber the link reaches up to 300m. Over single-mode fiber it reaches up to 2000m, or 200m when HDCP is in use. The optical path uses a 1310/1550nm laser diode source with a built-in 1310/1550nm WDM filter, at a transmission speed of 10.2Gb/s. The fiber link resists electromagnetic interference. The set is HDCP compatible, and EDID can be managed through a micro USB port.
Each end runs from a low-voltage power supply that comes with the set. The small units are meant for portable use or restricted spaces. A specification sheet and a user manual are available for download.
Video
Tekniset tiedot
- Merkki
- RGBlink
- Malli
- MSP 318-4
- Luokka
- Muut
Video
- Resolution (feature list)
- Up to 3840X2160@30
- Resolution (overview)
- Up to 3840x2160@60Hz
- HDCP
- Compatible
- Transmission speed
- 10.2Gb/s
Connectivity
- Source connection
- HDMI (transmitter plugs directly into source)
- Display connection
- HDMI (receiver plugs directly into display or downstream device)
- Fiber ports
- Integral LC
- Fiber type
- Single mode or multi-mode
- EDID management
- Via micro USB
Transmission
- Single mode distance
- 2000m (HDCP not compatible)
- Single mode distance with HDCP
- 200m (HDCP compatible)
- Multi-mode distance
- Up to 300m
- Optical source
- 1310/1550nm laser diode
- Optical filter
- Built-in 1310/1550nm WDM filter
- Interference
- Resists electromagnetic interference
Power
- Power supply
- Low voltage power supply at each end (included)
In the box
- Units
- Transmitter and receiver set
- Power supplies
- Included
Documents
- Specification
- EN, V1.6, 2022-11-07
- User manual
- EN, V1.2, 2022-11-07