UltraPhono Pro
The UltraPhono Pro is an all-analog, single-input phono preamplifier based on the core design of MoFi's MasterPhono. It suits vinyl listeners who want front-panel gain and loading adjustment for their cartridge.
- Single-input all-analog phono stage derived from MasterPhono
- Discrete J-FET and MOSFET gain stage
- Passive zero-feedback RIAA network, ±0.05 dB accuracy
- Front-panel gain and loading controls
- Mono, subsonic, mute and dim functions
- Seven-stage regulated balanced power supply
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin UltraPhono Pro, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The UltraPhono Pro takes the core circuit design of the MasterPhono flagship and applies it to a single-input phono stage, developed with audio engineer Peter Madnick. It uses a fully discrete J-FET and MOSFET gain stage and a passive RIAA equalization network with no feedback, with precision film-foil parts holding RIAA accuracy to ±0.05 dB.
Gain and cartridge loading are set from the front panel. Three gain settings and five loading values cover a range of cartridges, and listening controls for mono, subsonic filtering, mute and dim are provided. A seven-stage regulated balanced power supply is used to keep noise low.
The input is a single-ended RCA jack in voltage mode. Outputs are available as RCA (unbalanced) and balanced, with different gain values for each. The chassis combines brushed-aluminum panels with a rigid steel frame.
Video
Tekniset tiedot
- Merkki
- MoFi Electronics
- Malli
- UltraPhono Pro
- Luokka
- Hi-Fi ja kodin audio › Muu Hi-Fi
Inputs
- Input
- RCA jack, voltage mode, single-ended
- Loading
- 100 Ohms, 300 Ohms, 500 Ohms, 1k Ohms, 47k Ohms
Outputs
- Output impedance (balanced)
- 230 Ohms
- Output impedance (unbalanced)
- 115 Ohms
- Max output @1% THD
- 10 Volts RMS
Audio
- Gain (RCA output)
- 40dB, 52dB, 65dB
- Gain (balanced output)
- 46dB, 58dB, 71dB
- THD 10mV@1kHz, 40dB gain
- 0.005% A-Weighted
- THD 10mV@1kHz, 65dB gain
- 0.005% A-Weighted
- THD 1mV@1kHz, 40dB gain
- 0.010% A-Weighted
- THD 1mV@1kHz, 65dB gain
- 0.013% A-Weighted
- RIAA accuracy
- ±0.05dB
- Frequency response
- 10Hz–50kHz ±0.20dB
- S/N ratio, balanced 40dB gain (20Hz–20kHz)
- 82dB, 93dB
- S/N ratio, balanced 65dB gain (20Hz–20kHz)
- 78dB, 85dB
- S/N ratio, RCA 40dB gain (20Hz–20kHz)
- 75dB, 83dB
- S/N ratio, RCA 65dB gain (20Hz–20kHz)
- 69dB, 75dB
Features
- Gain stage
- Fully discrete J-FET & MOSFET input/output stages
- RIAA equalization
- Passive, zero feedback
- Power supply
- Seven-stage regulated balanced power supply
- Front-panel controls
- Gain, loading, mono, subsonic, mute, dim
Physical
- Dimensions
- 17" x 2.5" x 11.35"
- Weight
- 7 lbs
- Construction
- Brushed-aluminum panels with rigid steel frame