Origin20 Head
The Origin20 Head is a single-channel, all-valve 20W guitar amplifier head with switchable power reduction to about 3W and 0.5W. It suits guitarists who play in settings ranging from bedrooms to rehearsal rooms and small venues.
- All-valve single-channel 20W head
- Powerstem: 20W, approx 3W or approx 0.5W output
- 2 x EL34 power valves, 3 x ECC83 preamp valves
- Tilt control blends normal and high-treble voicing
- Switchable series FX loop
- Gain boost and FX loop via optional 2-way footswitch
Kuvat
8Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Origin20 Head, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The Origin20 Head is a one-channel valve amp head built around two EL34 power valves and three ECC83 valves in the preamp and phase splitter. Its Powerstem power scaling gives three output levels: 20W at full power, roughly 3W at mid power and roughly 0.5W at low power. Powerstem lowers the voltage rails around the power amp instead of using pentode/triode switching, so the tone is meant to stay the same at lower volumes.
The controls are Gain (with a pull boost), Tilt, Bass, Middle, Treble, Master and Presence, plus the Powerstem power selector. The Tilt knob shifts the sound from a normal voicing to a brighter, high-treble one, a single-knob take on the multi-input approach of older Marshall amps such as the 1959SLP and JTM45. The gain boost can be switched with an optional 2-way footswitch, which also turns the effects loop on and off.
The back panel has a series effects loop that can be switched in and out, speaker outputs on 1/4" jacks for 16Ω and 8Ω loads, and a 1/4" DI output. The head has one 1/4" instrument input and a footswitch input. It is finished in black and weighs 9.4 kg.
Video
Tekniset tiedot
- Merkki
- Marshall
- Malli
- Origin20 Head
- Luokka
- Live-äänentoisto › Vahvistimet
General
- Model
- Origin20H
- Range
- Origin
- Channels
- 1
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- High power 20W, mid power approx 3W and low power approx 0.5W
- Power reduction
- Powerstem, 20W to 3W or 0.5W
- Effects
- None
- Effects loop
- Yes, 1 x series switchable
Controls
- Controls
- Gain (pull boost), Tilt, Bass, Middle, Treble, Master, Presence, Powerstem power scaling
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Inputs
- Inputs
- 1 x 1/4" jack instrument input, footswitch
Outputs
- Speaker outputs
- 3 x 1/4" jack sockets (16Ω load / 8Ω load)
- DI output
- DI (1/4" jack)
Physical
- Weight
- 9.4 kg / 21 LB
- Width
- 520 mm / 20.5"
- Height
- 225 mm / 8.9"
- Depth
- 220 mm / 8.7"
- Country of origin
- Designed and engineered in UK. Made in Vietnam.
In the box
- Box contents
- PEDL-90016 included