Ilmoitukset
Onko sinulla sellainen? Myy se Soundium Marketissa
Kuvat, hinta, toimitus — 2 minuuttia. Ostaja maksaa Soundiumin kautta, ja sinä saat maksun pankkitilillesi.
Kuvaus
The Control HST is a compact on-wall speaker that faces its woofer toward the mounting surface and uses two horizontally splayed aluminum-diaphragm tweeters. Together with a tapered cabinet and a wall bracket that sets the distance from the wall, this layout is intended to reduce the reflections that normally cause peaks and dips in the frequency response of surface-mount speakers, giving a flatter response and a more even sound across a room.
The woofer uses a ceramic metal matrix diaphragm, and the tweeters use treated aluminum diaphragms with neodymium magnets and fluid cooling. The cabinet is fiberglass-reinforced ABS with a painted aluminum grille and is rated IP54, with salt-spray, humidity, temperature and UV resistance, so it can be used outdoors. It is available in black or white.
The speaker can run directly at 8 ohms or from a 70 V or 100 V line through transformer taps. Connection is by a removable locking four-pin euro-block with a parallel loop-through. The included U-bracket mounts on a wall surface only, not on a pole, and an extra M6 point is provided for a safety cable.
Tekniset tiedot
- Merkki
- JBL
- Malli
- Control HST
- Luokka
- Live-äänentoisto › PA-kaiuttimet
Audio
- Frequency range (-10 dB)
- 50 Hz – 20 kHz
- Frequency response (±3 dB)
- 68 Hz – 18 kHz
- Coverage angle
- 180°H x 160°V
- Directivity factor (Q)
- 5.4 (1 k – 16 kHz)
- Directivity index (DI)
- 7.2 dB (1 k – 16 kHz)
- Sensitivity
- 88 dB (Ave. 80 Hz – 20 kHz)
- Maximum SPL (1 m)
- Direct 8 Ω: 108 dB (peaks of 114 dB); 60 W tap: 97 dB @ 60 W
- Crossover network
- 1.6 kHz, 3rd order (18 dB/oct) high-pass to HF, 2nd order low-pass to LF
- Drivers
- LF: CMMD ceramic metal matrix diaphragm cone, 25 mm (1 in) voice coil. HF: two splayed tweeters, CMMD-treated aluminum diaphragms, polyurethane surround, polyimide bobbin, neodymium magnet, fluid-cooling
Power
- System power rating (IEC)
- 100 W (400 W peak), 2 hrs; 75 W (300 W peak), 100 hrs
- Impedance
- 8 ohms
- Transformer taps
- 70V: 60W, 30W, 15W, 7.5W; 100V: 60W, 30W, 15W
Connectivity
- Input connectors
- Removable locking euro-block 4-pin connector with screw-down terminals; two pins input, two pins parallel loop-thru; max. wire 12 AWG (2.5 mm²)
Physical
- Dimensions (H x W x D)
- 362 x 256 x 184 mm (14.25 x 10.1 x 7.2 in); cabinet 208 mm (8.2 in) depth with included bracket
- Net weight (each)
- 3.6 kg (8.0 lb); 4.3 kg (9.5 lb) with U-bracket
- Enclosure
- Fiberglass-reinforced ABS
- Grille
- Aluminum grille, painted to match cabinet color
- Colors
- Black (RAL9004) and white (-WH, RAL9016)
- Outdoor capability
- IP54 per IEC529; exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray
Mounting
- Attachment
- Four M6 points for included U-bracket; additional M6 insert for secondary safety cable; wall surface mounting only, not on pole
- Mounting hardware
- Included wall-mount bracket
In the box
- Included accessories
- U-bracket in matching color (black or white), zinc-rich extra-thick powder coated steel
Kysymykset
Ei vielä kysymyksiä — kysy ensimmäisenä.