Slap-Back Echo
A compact analog delay pedal that reissues a late-1970s Electro-Harmonix design. It gives a single short bucket-brigade echo in three delay times and is aimed at guitarists wanting slapback doubling or a clean level boost in a small pedalboard footprint.
- All-analog bucket-brigade (BBD) delay
- Three delay times: 45ms, 65ms and 100ms
- Gain knob gives up to +20dB boost
- Blend knob from 100% dry to 100% echo
- True bypass, Pico-sized chassis
- 9.6VDC-200mA power adapter included
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin Slap-Back Echo, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The Slap-Back Echo is an all-analog delay built around bucket-brigade (BBD) circuitry, reissued from a late-1970s original in EHX's Pico-sized chassis. It produces one short repeat in the style of 1950s slapback, covering subtle doubling through to tight, room-like reflections.
Three controls shape the sound. Gain sets the level going into the echo circuit and also acts as an output boost of up to 20dB; because it sits before the mix, both dry and echo signals are boosted, even with Blend fully dry. Blend crossfades from 100% dry to 100% echo. A three-position Time switch selects 45ms, 65ms or 100ms delay.
The pedal is mono with true bypass, and a status LED lights when the effect is engaged. It has a single input jack and an amp output jack, which in bypass is wired straight to the input. Power comes from the included 9.6VDC-200mA adapter, or any 9V supply with a center-negative plug.
Video
Tekniset tiedot
- Merkki
- Electro-Harmonix
- Malli
- Slap-Back Echo
- Luokka
- Efektit ja pedaalit
Audio
- Circuit
- Analog
- Audio
- Mono
- Delay times
- 45ms, 65ms, 100ms
- Gain boost
- Up to 20dB
- Blend range
- 100% dry to 100% echo
- Bypass
- True Bypass
Controls
- Knobs
- Gain, Blend
- Switch
- Time (3-position)
- Footswitch
- Engage/bypass with status LED
Connectivity
- Input
- Input jack
- Output
- Amp jack
- Power jack
- 9V DC, center negative
Power
- Power Supply
- 9.6VDC-200mA power adapter included
- Current Draw
- 15mA
- Required voltage
- 15mA at 9VDC, center negative plug
Physical
- Dimensions (in)
- 3.65 x 2.0 x 2.0
- Chassis
- Pico-sized
In the box
- Power adapter
- Electro-Harmonix 9.6VDC-200mA
General
- Year Released
- 2023
- UPC
- 683274012414