Pico Rerun

The Pico Rerun is a mono digital delay that imitates the sound of a tape echo, including preamp-style saturation and the pitch wobble of aged tape. Its algorithm comes from the Canyon Delay & Looper, packed into a small Pico enclosure.

Blend sets the wet/dry mix from fully dry to fully wet, and Delay covers 8 ms to 3 s. The Sat knob adds saturation and distortion to the repeats only, so the dry signal stays clean. Feedback runs from a single repeat up to runaway self-oscillation, and holding the footswitch triggers infinite repeats on the spot. A Flutter switch selects low, medium or high pitch modulation, shown by a green, orange or red LED. Tap tempo is set by pressing the footswitch at least twice, and the LED blinks at the tapped rate. Selectable tails bypass lets echoes decay after the pedal is switched off.

The pedal has a single input and output jack and a 9 V power jack. It uses buffered bypass and ships with a power adapter.