802 D4
Floor-standing three-way tower loudspeaker from the 800 Series Diamond range, sitting just below the flagship 801 D4. It suits reference-grade stereo listening and home theatre use in a living-room setting.
- 3-way vented-box floor-standing speaker
- 25 mm diamond dome tweeter, 150 mm Continuum FST midrange
- Two 200 mm Aerofoil cone bass drivers
- Frequency response 17 Hz–28 kHz (±3 dB)
- Sensitivity 90 dB, nominal impedance 8 Ω
- Four cabinet finishes; weighs 88.1 kg each
Kuvat
7Ilmoitukset
Tästä mallista ei vielä ole ilmoituksia
Kun joku myy mallin 802 D4, ilmoitukset ja myyntihistoria näkyvät täällä.
Myy samanlainenKuvaus
The 802 D4 is a three-way vented-box tower speaker with a 25 mm diamond-dome tweeter in a solid-body enclosure on top of the cabinet, a 150 mm Continuum cone FST midrange and two 200 mm Aerofoil cone bass drivers. The midrange sits in the Turbine Head enclosure shared with the 801 D4 and is mechanically decoupled from the bass drivers to reduce interference. Biomimetic Suspension supports the midrange cone, and the bass cones carry an Anti-Resonance Plug.
The cabinet has an aluminium top-plate fitted with Leather by Connolly trim, black for dark finishes and light grey for lighter ones. Matrix internal bracing and Flowport port technology are listed among the technical features. Finishes are Gloss Black, White, Satin Rosenut and Satin Walnut, with black or grey grilles.
The nominal impedance is 8 Ω with a 3.0 Ω minimum, and the recommended amplifier power is 50 W to 500 W. The speaker is a passive model driven from an external amplifier through speaker cables, with a maximum recommended cable impedance of 0.1 Ω. A manual, info sheet and brochure are available from the maker.
Video
Tekniset tiedot
- Merkki
- Bowers & Wilkins
- Malli
- 802 D4
- Luokka
- Hi-Fi ja kodin audio › Kaiuttimet
Drive units
- Tweeter
- 1x ø25mm (1in) Diamond dome high-frequency
- Midrange
- 1x ø150mm (6in) Continuum cone FST midrange
- Bass
- 2x ø200mm (8in) Aerofoil cone bass units
- Design
- 3-way vented-box system
Audio
- Frequency range
- 14Hz to 35kHz
- Frequency response
- 17Hz to 28kHz (+/-3dB from reference axis)
- Sensitivity
- 90dB (on axis at 2.83Vrms at 1m)
- Harmonic distortion
- 2nd and 3rd harmonics (90dB, 1m on axis)
- Nominal impedance
- 8Ω (minimum 3.0Ω)
Power
- Recommended amplifier power
- 50W – 500W into 8Ω on unclipped programme
- Max recommended cable impedance
- 0.1Ω
Technology
- Technical features
- Diamond tweeter, Solid body Tweeter-on-Top, Continuum cone FST, Matrix, Anti-Resonance plug, Biomimetic Suspension, Turbine Head, Aerofoil cone bass units, Flowport
Physical
- Net weight
- 88.10kg (194.2 lb)
- Height
- 1218mm (48 in)
- Width
- 413mm (16.3 in)
- Depth
- 602mm (23.7 in)
Finishes
- Cabinet finishes
- Gloss Black, White, Satin Rosenut, Satin Walnut
- Grille finishes
- Black, Grey